Cahoza

80 Pitch plastic spur gear 44T “Elite“ ( selected for accuracy )£ 3.25

80 Pitch plastic spur gear 45T “Elite“ ( selected for accuracy )£ 3.25

80 Pitch plastic spur gear 46T “Elite” ( selected for accuracy )£ 3.25

72 Pitch plastic spur gear 42T ( 15.4mm dia ) £ 3.50

72 Pitch plastic spur gear 43T ( 15.7mm dia ) £ 3.50

72 Pitch plastic spur gear 44T ( 16.1mm dia ) £ 3.50

64 Pitch plastic spur gear 36T £ 3.25

64 Pitch pinion 7T 2mm bore. Nitrided. Very very accurate pinion for use with any 64 Pitch gears £ 7.50

80 Pitch pinion 7T 1.5mm bore. Nitrided. Very very accurate pinion for

use with any 72 pitch gears £ 6.75

Tough epoxy. Oven cure. £ 2.75

Graphite guide – not threaded £ 0.70

Cut down graphite guide – not threaded £ 0.80

9mm guide nuts £ 0.80

9.27mm guide nuts £ 0.80

Thin rubber front wheels £ 1.00pr

Motor ballrace 2 x 5mm open. Unflanged. £ 4.50

Motor ballrace 2 x 5mm open. Flanged. £ 4.50

Pro wrench with facility for 9mm guide nut £ 9.50

GP12 motor. Fully blueprinted. Features lightweight can, Ali endbell, Tornado 2 magnets, double ballraces, Koford .518 X12 armature, Koford brushes and silver shunts. Professionally assembled at Cahoza

Weighs just 19.6 gms £88.00

Very latest Ali endbell as used on above motor. Ballraced. Assembled at Cahoza. £32.00

Ali endbell for C can motors. Ballraced. Fully assembled. Gold hoods. fits Cahoza cans only. £15.00

Ultralight C can £12.00

Tornado 2 C can magnets. Selected for extra strength. £ 8.75

3 coil springs. Selected for consistant tension. £ 1.20pr

Precision arm spacers. Phosphor bronze. .004 thick. 24 pieces per bag.

£ 2.50

Precision arm spacers. Phosphor bronze. .007 thick. 24 pieces per bag.

£ 2.50

Precision arm spacers. Phosphor bronze. .118 thick. 24 pieces per bag.

£ 2.50

Precision axle spacers. Phosphor bronze. .012 thick. 24 pieces per bag.

£ 2.50